RESOLUTION AIR’S HIGH FORCE IP66 RATED FLUID METERING VALVE
Sanitary Flow Control Pinch Valve
Fluid separation and flow metering in one precision pinch IP66 rated valve.
The IP66 rated Hybrid Proportional Pinch Valve Series (HPPV-EN) combines the benefits of pinch valve fluid separation and proportional valve control for sanitary processes already available in the patented HPPV-Series with protection against dust and water ingress. With the addition of the IP66 rated enclosure, barriers associated with environmental conditions are eliminated launching the HPPV-EN into systems and applications not previously obtainable. In addition, the HPPV-EN incorporates robust M12A 8 pin connector technology streamlining installation and wiring for both the valve and integral home sensor. As well as providing fluid metering, the HPPV-Series generates 12x (50 lbs.) the pinch force of a typical solenoid pinch valve. This is a tremendous benefit in systems requiring higher system pressures and larger tube diameters (1/4” O.D.-0.750” O.D.).
HPPV-EN ADVANTAGES
- IP66 Rated
- M12A 8 Pin connector plug
- Automated control
- No physical contact with process fluid
- High resolution flow control
- High repeatability
- Low power consumption
- 12x pinch force (50 lb.) of solenoid pinch valve
- Home sensor indicates full open position
- High system pressures
- Tube size range: 1/4” O.D. – 0.750” O.D
Dimensional Specifications
| Valve Mode | A Tube Size (O.D.) | H Overall Valve Height | D Overall Valve Diameter | *Travel Rate |
| HPPV-4-EN | .250” | 5.325” | 0.937” | 0.52 sec. |
| HPPV-6-EN | .375” | 5.468” | 0.937” | 0.78 sec |
| HPPV-8-EN | .500” | 5.826” | 1.125” | 0.89 sec. |
| HPPV-12-EN | .750” | 6.429” | 1.5” | 1.3 sec. |
*Full open to full closed @1000 steps/sec.
Performance Characteristics
| Standard Tube Sizes (O.D.) | 1/4”, 3/8”, 1/2”, 3/4” |
| Recommended Tubing Durometer | 50-80 Shore A |
| Max. Temp | 180° F |
| Motor Type | Bi-Polar Stepper Motor |
| Position Resolution | .00048”/step |
| Power Consumption | 5.7 Watts |
| Motor Supply Voltage | 24-40 VDC Unregulated Power Supply |
| Electrical Connection | M12 8 PIN IP 67 Connector |
| Driver Requirements | Bi-Polar Chopper Drive |
| Home Switch | 10 kOhm Pull-Up Resistor Installed |
| Home Switch Supply Voltage | 3.8-24 VDC |
| Max. Pinch Force | 50 lbs. @100 steps/sec |
| Certifications | RoHS, CE, IP66 |
Download the EN-Series Technical Data Sheet
